Keep Your Family Safe With Our Burglar Alarm Systems
The number 1 priority for getting a Burglar Alarm System is to keep your family safe and protect all your family possessions. Your Burglar Alarm will not only give you peace of mind but will also provide a extra layer of protection allowing you to relax, knowing your family and household items are safe from the threat of criminals.
There is no doubt as times get tougher that crime becomes more common place and your number 1 priority is to focus on prevention. In this case prevention is 100% better than the cure so putting a sensible plan together that provides a burglar alarm system is essential.
Naturally your burglar alarm system is put in place by our professional team of alarm installers and comes with stickers for your windows both in the front and out the back. Burglars don’t care which window or door they come in but will definitely be deterred if they see a alarm system sticker or video surveillance camera in place around your home.
In addition to the stickers and obvious signs that a burglar alarm system is installed on your premise, a security system keypad is available and is usually installed at the entrance to your home or in the garage. This will allow you to enable and disable the alarm system when entering and leaving your home. You will be given your own security codes that you need to keep safe.
A lot of the time your insurance premiums will actually come down when you notify them that you have a security system installed, which provides another level of benefits for getting your burglar alarm system.
Passive Infrared Detectors
A Passive Infrared burglar alarm reacts when a change of temperature passes through a background of a fixed temperature. A burglar alarm signals when the unit measures a change in energy caused by an intruder.
Magnetic Reed Switches
Used to protect storage spaces, garages and doors; a magnetic reed switch is a very effective way to protect an entrance. A sealed reed switch and magnet are paired together on either side of the protected entryway and upon their separation, an alarm will signal and Aussie Group Security’s Alarm Response Centre will be notified of the intruder detection.
Glass Break Detectors
Glass break burglar alarms work by responding to the sound or shockwave produced by glass breaking. An alarm will signal when the unit recognises the distinct sound of glass breaking. It is important to note that equal coverage should be provided to all panes of glass to ensure maximum-security intruder detection.
Seismic Detectors
When used on vaults or safes, seismic detectors can provide a high level of security to protect against invasion. Also called vibration detectors, they react to energy expended by a structure when an intruder is attempting to gain entry. An alarm sensor can detect drilling of surfaces, or a hammer like impact on a ridged surface. A signal will then be sent to Aussie Group Security’s Alarm Response Centre.
Hold Up Burglar Alarms
This range of burglar alarms can include hold-up button, foot rail, money clip, remote or a panic button. All of these devices are kept in a discreet location; however Aussie Group Security can immediately request police attendance upon receiving a signal of this nature.
Burglar Alarm Additions
There are a number of additional products that can be added to your alarm system to enhance your security solution, such as:
- Video feed
- Smoke cloak
- Smoke and Thermal Detectors
To find out more about Alarm Systems and Detectors, contact Aussie Group Security on the number below.
Aussie Group Security offer Security Products and Security Systems for Home and Business Security. Aussie Group Security have the best security solutions for access control, alarm systems, CCTV camera & video surveillance, alarm monitoring and perimeter security and the best medical alert for personal emergency response. Contact Aussie Group Security today to organise a free no-obligation assessment or call 1300 795 446.